The Everything Guide To Removing Asphalt Shingles And Replacing Them With A New Metal Roof


If the roofing on your home is getting old and outdated, it may be time to consider tearing off the shingles and replacing your roof. When you are doing your roof replacement, you may want to consider a more durable and attractive roofing material for your home, such as new metal roofing. The following guide will help you choose the repairs and improvements that need to be done when replacing your asphalt shingles with a new metal roof.

1. Removing the Shingles and Repairing Any Damage to Prepare to Install Metal Roofing

When you are planning on replacing old shingles with metal roofing, you will need to start by tearing the old materials off. When you are tearing off the old shingles, remove the felt paper moisture barrier as well and inspect the wood decking and wood framing for any damage that needs to be repaired before the new metal is installed.

2. Leaving a Gap for Air Circulation to Reduce Heat Gain and Prevent Damage from Metal Roof Sweating

Heat gain and sweating are some of the biggest problems with metal roofing on residential homes. Therefore, you want to consider installation improvements that will help prevent these problems. To start, you may want to install slats that the metal roofing can be installed on, which will allow air to circulate beneath the roofing and prevent heat gain, as well as reduce problems with sweating.

3. Protecting Wood Decking and Framing from Damage Due to Condensation with a Good Rubber Membrane Moisture Barrier

Sweating is a serious problem when you have metal roofing installed on your home, which can be reduced by installing a quality moisture barrier. These moisture barriers can be synthetic, plastic-like materials or durable rubber membrane materials that help provide more protection against leaks and damage to the wood beneath the metal.

4. Flashing and Reinforcing Areas of Your New Metal Roof That Are Most Vulnerable to Wear, Leaks, and Damage

Lastly, there is a lot of flashing that will need to be installed with your new metal roof. These are usually areas that are vulnerable to wear and leaks, which is why you will want to make sure that there is reinforcement anywhere there is flashing and cuts in the metal roofing to ensure minor leaks in any of these areas to not lead to big damage to your home.

These are some of the things that you will want to consider when replacing your asphalt shingles with a new metal roof. If you are ready to replace your old shingles with metal roofing, contact a roofing contractor for help planning and completing the project.

For more information, visit a website like


7 February 2020

Creating Great Roofing From the Start

When you want to make your home shine, there are some very important basic components you should be mindful of. For starters, you should evaluate the exterior of your home to determine whether or not the siding or exterior cladding needs to be replaced. Next, you should check to see if the roofing needs to be replaced, since it really can make a powerful difference. Roofing can take up a great deal of the visual space from the outside, so think carefully about how yours looks. Pay attention to issues like aged, curling shingles or roofing that contains dips or divots. Check out this blog for great tips about roofing.